Rotary Drilling Rig XCMG XR150D
It introduces the back-inclination large triangle structure with stationary luffing support, witch is suibable for working conditions of low-tonnage drilling rig, improving the rigidity of working mechanism and enhancing the stability of whole drilling rig while achieving easy transportation;
The imports Kawasaki hydraulic components enable power systems reasonablly matched and high efficiency of construction;
The imported Cummins engine can minimize fuel consumption with the help of two optional accelerator control modes;
The Working amplitude of auxiliary winch is increased, which can hoist light and small objects and save cost as well;
The main winch is designed with a high displacement motor, achieving more sensitive response and more reliable working and also getting rid of the difficulty in earth dumping ofr pile holes of small diameter;
The standard reducer joint can adjust drill rod combination and improving construction efficiency;
It introduces the proprietary intellingent control system, CAN bus and PLC, including automatic/manual adjustment of drilling mast verticality, depth automatic detection and display, intelligent fault diagnosis and control.
Main Technical Data of XR series Multi-functional Combined Rotary Drilling Rig model XR150D
|
Name
|
Unit
|
Parameters
|
|
Engine
|
Engine model
|
|
CUMMINS B5.9-C
|
|
Engine rated power/rotary speed
|
kW
|
133 /2000r/min
|
|
Max. Torque of engine
|
N.m
|
553 /1500r/min
|
|
Rotary drive
|
Max.output torque
|
kN.m
|
150
|
|
Rotary speedRotary speed
|
rpm
|
6~28
|
|
Max. drilling diameter
|
mm
|
Æ1300
|
|
Max. drilling depth
|
m
|
48(standard)
|
|
55(optional)
|
|
Safe operation range(from rotarying centre)
|
mm
|
3150~3550
|
|
Dimension in working condition(L×W×H)
|
mm
|
7122×4200×17250
|
|
Dimension in transportation condition(L×W×H)
|
mm
|
12300×3200×3060
|
|
Overall drilling weight(drilling tools not included)
|
t
|
45.5
|
|
Pull-Down cylinder
|
Max. pull-down piston push
|
kN
|
120
|
|
Max. pull-down piston pull
|
kN
|
160
|
|
Max. pull-down piston stroke
|
mm
|
3500
|
|
Main winch
|
Max. pulling force
|
kN
|
145
|
|
Max. wire speed
|
m/min
|
75
|
|
Wire diameter
|
mm
|
26
|
|
Auxiliary winch
|
Max. pulling force
|
kN
|
50
|
|
Max. wire speed
|
m/min
|
60
|
|
Wire diameter
|
mm
|
16
|
|
Mast
|
Side
|
°
|
±3
|
|
Forwards
|
°
|
±5
|
|
Backwards
|
°
|
±15
|
|
Track
|
Max.traveling speed
|
km/h
|
3.2
|
|
Max.grade ability
|
%
|
40
|
|
Min. Clearance
|
mm
|
352
|
|
Track width
|
mm
|
800
|
|
Outside width(min-max)
|
mm
|
3200~4200
|
|
Hydrulic system
|
Max. pressure
|
Mpa
|
32
|
|
Slewing bearing
|
Slewing bearing angle
|
°
|
360
|
|
Safe operation range(from rotarying centre)
|
mm
|
3150~3550
|
|
Dimension in working condition(L×W×H)
|
mm
|
7122×4200×17250
|
|
Dimension in transportation condition(L×W×H)
|
mm
|
12300×3200×3060
|
|
Overall drilling weight(drilling tools not included)
|
t
|
45.5
|
