It can make good cutting section of large area, featuring high productivity.
Powerful Cutting Capacity
Adopt the cutter head manufactured by international top-grade technology, which has characteristics as large force of designed single cutter, reasonable layout of cutting teeth and powerful coalbed cutting capacity. The high-inertia assures the small fluctuation of load and small cutter head may increase cutting force. Maximum improves the cutter force, reduce the vibration as machine’s operation and decreases the abrasion of cutter and tooth adapter. Take special cutting bit in rock drift driving, which can improve its abrasion strength.
Adopt the effective cutting double speed technology. The cutting motor is with 230/150kW power and big cutting torque, being 1.5 times bigger than that of EBZ160 standard type our company manufactured.
At the grow-up geology condition, the machine may economically cut the 90MPa overall rock section, whose maximum located cutting section and cutting hardness may respectively reach 30.5 m2 and 110MPa.
Add force-adjusted horizontal supporting. EBZ230 type rock roadheader is innovatively designed with the shrinkage type oil cylinder being capable to reach the guard and with the same width up to machine body. The machine is with small specific pressure of earthing, which adapts to various bottom plates. The specific pressure of earthing for 0.165Mpa may adapt to soft bottom plate.
Good Effect on Dust Removal
The machine is with perfect characteristics as dustproof, i.e. operator needs not to wear breathing mask, convenient operation and not directly frontal drainage. As measured, the dust content in high hardness sandstone roadway may reach 1000 mg/m3 when cutting the rock. EBZ230 hard rock roadheader is equipped with high efficient dust removing system with patent design, which sufficiently makes use of the feature on one-end tunnel, is reasonably equipped with mounted dust removing system with high efficiency and long pressure and short drawing in accordance with the size of section area and the wind volume. The total dust removing efficiency for dust removal method with little water bathing may reach more than 95%, thus the dust can be fully suppressed within the 2 or 3 meters scope.
High Efficiency Loading
Rock loaded is easy to be blocked in shovel and first conveyor, which is the difficult problem restricting headway. The first conveyor of EBZ230 hard rock roadheader adopts double high torque drive motor and the shovel unit adopts the special anti-block material design which both make material transportation be continuous and clear and shorten the blocks removal time.
|
Power of cutting motor
|
230/150 kW
|
|
Motor Power of Oil Pump
|
132 kW
|
|
Maximum Rock-Cutting Unidirectional Compression Strength
|
≤100/80 Mpa
|
|
Cutting range
|
Height: 5.056 m
|
|
Width: 6.029 m
|
|
Area:30.5 m2
|
|
Complete Machine Weight
|
80 t
|
|
Dimension (LXWXH)
|
11.677X2.70X2.00 m
|
|
Size of Max Undisassebly Part (L×W×H)
|
3.755X1.50X1.47 m
|
|
Weight of Max undisassembly part
|
8700 Kg
|
|
Rotary speed of cutter head
|
31 r/min
|
|
Loading capacity
|
4.3 m³/min/Five Gears Star Wheel
|
|
Width of Crawler Belt
|
650 mm
|
|
Speed of driving unit
|
0～6.0 m/min
|
|
Climbing Capacity
|
±18º
|
|
Gantry height
|
400 mm
|
|
Required underground water-supply pressure
|
Outside≥2.5 MPa
|
|
Inside≥3.0 MPa
|
|
Pressure to Earth
|
0.165 MPa
|
|
Dinting depth
|
225mm
|
|
Ground clearance
|
260mm
|
|
Supply voltage
|
AC1140V
|
|
Frequency
|
50 Hz
|
